CR-V ABS燈亮
ABS自我診斷
1.跨接2pin診斷接頭..............
2.點火開關ON...
3.從儀錶ABS指示燈.......閃爍次數讀取故障碼..
清除故障碼..
1.跨接2pin診斷接頭........點火開關ON..(不發動)
2.踩下煞車踏板，ABS燈亮。......約2秒後ABS燈會熄滅，放開煞車踏板。
3.大概3~4秒後ABS燈會亮，在次踩下煞車踏板。
4.約3~4秒後ABS燈會熄滅，在次放開煞車踏板。
5.約4秒後儀錶ABS指是燈會閃爍2下，顯示ABS故障碼已清除。
6.點火開關OFF拆下跨街線。
11.Wheel speed sensor, right front-circuit malfunction
13.Wheel speed sensor, left front-circuit malfunction
15.Wheel speed sensor, right rear-circuit malfunction
17.Wheel speed sensor, left rear-circuit malfunction
12.Wheel speed sensor, right front-signal malfunction 21.
14.Wheel speed sensor, left front-signal malfunction 22 .
16.Wheel speed sensor, right rear-signal malfunction 23.
18Wheel speed sensor , left rear-signal malfunction 24.
31.inlet front RH 32.outlet front RH 33.inlet front LH 34.outlet front LH 35. inlet rear RH 36. outlet rear RH 37. inlet rear LH ........38.outlet rear LH solenoid valve malfunction.....
51.ABS pump motor seized
52.ABS pump motor stuck off
53.ABS pump motor stuck on
54.System relay
61.Supply voltage high/low
81.ABS control module
留言列表
